Review of Tesla Invader 2/3

0
Want create site? Find Free WordPress Themes and plugins.

Overview

The Tesla Invader 2/3 is the latest product from Teslacigs Invader series. The device has been entirely upgraded. The performance has been improved. The best part about the improvement is the battery scheme. It can switch between dual-battery system and triple-battery system.

Design and Quality

The Tesla Invader 2/3 has the capabilities of using two batteries which have the maximum power output of 240 watts and three batteries with a 360W maximum power output. It comes with a three battery back or the flatter two battery back. You are required to use the battery back depending on the number of batteries you are using since it is wired in series. If you take a closer look at the mod when using three batteries, you will notice that the back has a trapezoidal shape. If you only use two batteries in it, there will be no hump on its back. The battery backs are held on by friction and that means there are no magnets present on this mod.

When you choose to remove the battery when using the three battery-back, all you need to do is place a finger on top of the battery back and push it down while holding the mod. This will loosen the battery back and will easily slide off. You do not have to worry about accidentally sliding it off because it has been placed there firmly. It is harder to remove the battery when using the mod with the two battery-back. It is more compact and the back is thin, you just have to remove it very carefully. The mod does not have a USB port so you will have to use a charger when the battery is drained.

When it comes to the device’s voltage, it has been designed to be a variable voltage only mod. This means that the device does not have support for temperature control coils. You also will notice right away that this mod does not have a digital screen and there are no buttons to adjust its voltage.

This mod’s voltage is set through a potentiometer which is located at the bottom of the front of the device. It is denoted with 3 volts through 8 volts and has a ¼ marking on the dial between each number. You will notice that the potentiometer does not have the detents in order to clearly identify what the setting is. However, you are able to set the potentiometer easily with just the use of your fingernail. The voltage will not be changed inadvertently because there is just enough resistance with the voltage setting. The wattage is set based on the resistance of the coil you are using.

There is a LED light located at the bottom of the body and this makes you know better the usage of the product. You also can see the fire button is located at the upper part of the front side on the device. It really is a convenient design which is easy for users to find its position. This will make you gain a more comfortable usage experience.

Specifications

This box mod is 50mm by 42mm by 85mm in size when you are using the three battery back. If you use the two battery back, this device is 35mm by 42mm by 85mm in size. It has a solidly built body because the material is a die cast zinc alloy. This device is powered by a high drain 18650 battery cell and it accepts 510 threads. The maximum wattage output when using two batteries is 240W and 360W when using three batteries. This device can work on a voltage output range between 3-8 volts. There is a LED indicator on this device and the color is blue. You are also sure that using the product is safe because it has an over puffing and reverse connection protection. Additional protections from this device are, atomizer short-circuit protection, low voltage alert, overheat and over-current protection.

What’s in the Box

When you purchase the device, you will have one Tesla Invader 2/3 Box mod. Batteries are not included upon purchase but you can buy them separately. There is also an additional battery cover included in the box. You also get one warning card and one user manual.

Conclusion

The Tesla Invader 2/3 has a great feature and this device is also great for vapers who are into DIY. The potentiometer feature is really awesome. It is easy for adjustment and it has got features like a fierce explosion and fast ignition. What is great abut this is it is sold at a very affordable price of $38.99 and you are able to purchase it right away on http://www.urvapin.com/.

 

Did you find apk for android? You can find new Free Android Games and apps.

You might also like More from author

Leave A Reply

Your email address will not be published.